Web-based Threats-2018 Q2: U.S. Remains #1 in Malicious Web Addresses, China Falls from #2 to #7

Executive Summary

In Q2, the United States was number one for hosting malicious domains and exploit kits.

Unit 42 regularly analyzes statistical data from our Email Link Analysis (ELINK) to understand the patterns and trends in current web threats.  This blog outlines our analysis for April – June (Q2) 2018  and follows up our previous blog analyzing web-based threats for January – March (Q1) 2018 that can be found here. We also provide detailed analysis of attacks against CVE-2018-8174 (a vulnerability we discuss below) using the Double Kill exploit.

What we found this quarter was that vulnerabilities under attack remained consistent, including very old vulnerabilities. One new vulnerability used zero-day attacks did rocket to near the top of the list.

The United States remained the number one hoster of malicious domains, with a marked increase in the Netherlands as well. Outside of these two countries hosted malicious domains dropped markedly across the globe, including in Russia and China.

The United States was also the number one hoster for exploit kit (EKs) globally by a more than two to one margin compared with the number two country, Russia. In fact, the United States alone accounted for more EKs globally than all other countries combined. KaiXin, Sundown, and Rig exploit kits remained active from Q1 to Q2. We saw a significant difference in regional prevalence with KaiXin being found primarily in China, Hong Kong, Korea and Grandsoft (a newly emergent EK), Sundown and Rig prevalent everywhere else.

Based on our findings, our guidance is for organizations to focus on ensuring Microsoft Windows and Adobe Flash and Reader are fully up to date with the latest versions and security updates. In addition, organizations should look at using limited privilege user accounts to limit the damage of malware. Finally, protections against malicious URLs and domains and using endpoint security to prevent malware like exploit kits can all help with the threats outlined in this posting.

 

Key Takeaways:

  • Malicious Hosted Domains
    1. The United States remains the number one country for hosting malicious domains.
    2. Overall, except for the Netherlands, the number of malicious domains hosted outside of the United States was significantly smaller than we saw in Q1.
    3. We saw a significant increase in malicious domains hosted in the Netherlands.
    4. We saw significant decreases in malicious domains hosted in Russia and China dropping both to be tied at number 7 on our list.
    5. While we saw a significant decrease in malicious domains hosted in Hong Kong, it remained the third largest hoster of malicious domains.
    6. Australia moved to number four on the list, but the increase wasn’t significant.
    7. The number of malicious domains hosted in Germany dropped by over half.
    8. The number of malicious hosted domains in the United Kingdom and Italy was unchanged. However due to the overall decline outside of the United States and the Netherlands, they actually moved from being tied at number 3 to number 6.
  • Vulnerabilities
    1. A new vulnerability is aggressively used.
      • CVE-2018-8174, a Microsoft VBScript vulnerability that was used in zero-day attacks and patched in May has been aggressively used in web-based attacks this quarter.
    2. Very old vulnerabilities are still useful.
      • CVE-2009-0075, a nine-and-a-half-year-old vulnerability Microsoft Internet Explorer 7 vulnerability was in our top five list last quarter and is number four this quarter.
      • CVE-2008-4844, another nine-and-a half vulnerability affecting Microsoft Internet Explorer 5, 6 and 7 is number five this quarter.
    3. Vulnerabilities under attack remain consistent.
      • Four of our top five this quarter were in our top six list last quarter (CVE-2016-0189, CVE-2014-6332, CVE-2009-0075, and CVE-2008-4844)
  • Exploit Kits
    1. The United States was the number one source for Grandsoft, Sundown, and Rig and the number two source for KaiXin making it the number one source for Exploit Kits globally. In fact, the US accounted for more than twice the number of Exploit Kits globally as the number two, Russia.
    2. Russia was number two globally for Grandsoft, Sundown and Rig exclusively.
    3. KaiXin showed up primarily in China, Hong Kong, and Korea, with limited distribution in the United States and Netherlands.
    4. Consistent with other findings in this report, the Netherlands came in at number 5 on our list, primarily for Grandsoft, Sundown and Rig but also KaiXin.
    5. Australia came in at number 6 on our list. Interestingly, even though KaiXin was prevalent in the APAC region, there were no instances of KaiXin in Australia only Grandsoft, Sundown and Rig.
    6. KaiXin, Sundown, and Rig were consistently in use across Q1 and Q2.
    7. Sinowal which we tracked in Q1 disappeared this quarter.
    8. Grandsoft is a new entry this quarter.

 

Analysis

Vulnerabilities (CVEs)

In the second quarter of 2018 we observed 6 different CVEs being exploited. Table 1 below shows the top three CVEs for the first and second quarters of 2018.

1st Quarter 2nd Quarter
1. CVE-2014-6332: exploited by 774 malicious URLs 1. CVE-2016-0189: exploited by 472 malicious URLs
2. CVE-2016-0189: exploited by 219 malicious URLs 2. CVE-2018-8174: exploited by 291 malicious URLs
3. CVE-2015-5122: exploited by 85 malicious URLs 3. CVE-2014-6332: exploited by 67 malicious URLs

Table 1. CVE comparison between first and second quarter 2018

The chart below shows the CVEs and number of URLs seen leveraging the respective CVEs.

 

Figure 1. CVE distribution graph

Compared to the data observed from the first quarter of this year, the URL count exploiting certain CVEs have changed positions in ranking.

CVE-2014-6332, a four year old code execution vulnerability in Microsoft OLE automation fixed by MS14-064, dropped significantly from first place with 774 malicious URLs, to third place with 67 malicious URLs. In the second quarter.

CVE-2015-5122, a three year old code execution vulnerability in Adobe reader fixed with an emergency release by APSA15-04 and later by APSB15-18, was number three last quarter but dropped off the top six list entirely this quarter.

CVE-2016-0189, a two year old scripting engine vulnerability affecting Microsoft Internet Explorer, as well as Jscript and VBScript and fixed by MS16-051 and MS16-053 respectively, moved by number one by more than doubling its previous standing from 219 malicious URLs in the first quarter to 472 malicious URLs in the second quarter.

Of particular note is CVE-2018-8174 a code execution vulnerability in the Microsoft VBScript engine that was detected as a zero-day attack and patched by Microsoft in May 2018. This vulnerability wasn’t publicly known until the second quarter and we can see was quickly used by attackers taking advantage of it, making it number two on our list in the second quarter, exploited by 291 malicious URLs.

To shed more light on this CVE we investigated an active exploit dubbed Double Kill which we will discuss in the case study section of this blog below.

Finally, we should note again the presence of CVE-2009-0075, a vulnerability from February 2009 in Microsoft Internet Explorer 7 fixed with MS09-002 and CVE-2008-4844 a vulnerability in Microsoft Internet Explorer 5, 6 and 7 fixed with MS08-078. These two roughly nine-and-a-half-year-old vulnerabilities continue to be useful for attackers, as shown by them being number five and six list last quarter and number four and five on our list, respectively, this quarter.

The net lessons from this quarter’s statistics are the very old and very new vulnerabilities show themselves to be useful. There’s also a steadiness to the vulnerabilities attackers are favoring since four of the top five vulnerabilities this quarter were in use last quarter. The fact that number two on our list is new vulnerability only addressed in May and was used in zero-day attacks also tells us that attackers are ready to move quickly to adapt their attacks to vulnerabilities shown to be useful.

The continued use of these two nine-and-a-half-year-old Internet Explorer vulnerabilities also tells us that Internet Explorer 7 and earlier are in use and unpatched.

 

Domains/URLs

Domains

We observed 440 malicious domains serving up to exploit the aforementioned CVEs. A list of countries and regions is below:

 

Ranking in Q2 Country/region Number of domains in Q2 Number of domains in Q1 Previous Ranking in Q1
1. US United States 248 257 1
2. NL Netherlands 31 13 5
3. HK Hong Kong 9 41 3
4. AU Australia 6 1 11 (tied)
5. DE Germany 5 12 6
6 (tied) GB United Kingdom 3 3 9 (tied)
6 (tied) IT Italy 3 3 9 (tied)
7 (tied) CN China 2 106 2
7 (tied) RU Russian 2 20 4
8 (tied) CA Canada 1 0 NA
8 (tied) ES Spain 1 1 11 (tied)
8 (tied) FR France 1 8 8
8 (tied) IE Ireland 1 0 NA
8 (tied) KG Kyrgyzstan 1 0 NA

Table 2. country/region distribution graph of malicious domains

URLs

As far as malicious URLs go, the United States takes the lead with 495 malicious URLs and Russia is runner up with 147 URLs. Compared to the first quarter blog, malicious URLs hosted in United States almost doubled in the second quarter, while malicious URLs hosted in Russia were almost seven times higher.  The complete count for each country/region is shown below in Table 2:

 

 

Figure 3. Malicious URLs country/region distribution graph

Exploit Kits

There were 1072 malicious URLs out of the total 1373 serving EKs. As with malicious domains, we were unable to discover hosting information for some of the domains as they were gone prior to starting research on this blog, which is why Figure 3 adds up to less than 1373.

The EKs we found in our analysis for this quarter included KaiXin, Grandsoft, Sundown, and Rig. Three of these EKs were in our Q1 report: KaiXin, Sundown, and Rig. One EK in our Q1 report, Sinowal, has dropped out of our list. And Grandsoft was not present in our list in Q1 and is now in our list.

 

Ranking Country KaiXin Grandsoft, Sundown, and Rig Total
1. USA 44 252 296
2. Russia 0 139 139
3. China 47 0 47
4. Hong Kong 31 10 41
5. Netherlands 2 31 33
6. Australia 0 6 6
7. Korea 5 0 5
  Total 129 438 567

Table 4 Ranking of Countries Hosting Exploit Kits

The various EKs seem to target a certain country or region cluster. For instance, KaiXin EK was only reported in 5 country/regions (see Figure 4 below), mostly within Asia. This EK mostly leverages the vulnerability CVE-2014-6332.

Figure 4. KaiXin EK distribution graph

The Grandsoft, Sundown, and Rig EKs were far more visible in other parts of the world. Out of the 16 country/region where they were seen, the United States had the highest number of malicious links EKs, at 252. Second and third place were Russia with 139, and the Netherlands with 31. These EKs mostly exploit CVE-2016-0189. Figure 5 below shows each country/region and associated numbers.

Figure 5. Grandsoft/Sundown/Rig EK distribution graph

Case Studies

Evolution of Attacks Against CVE-2018-8174

As noted in the previous CVE section, on May 8, Microsoft published information and a patch for CVE-2018-8174, a Windows VBScript Engine Remote Code Execution Vulnerability. It’s a critical vulnerability that impacts 31 Microsoft products and could lead to remote code execution. A couple of notable exploits of this CVE that we’ve observed are discussed in the below case studies.

Double Kill: Version 1

Unit 42 found the first active exploit in the wild on May 12, four days after a patch was issued. It is interesting to point out that it took four days for threat actors to create and weaponize the exploit after Microsoft’s disclosure of the vulnerability. 

The first version of the exploit didn’t obfuscate html code, except for functions and variables with “I”, “1”, “l” or combinations thereof; note that while two of the letters look the same, one is an uppercase ‘i’ and the other a lowercase ‘L’. Also, we observed some plaintext strings in the exploit; “msvcrt.dll”, “ntdll.dll”, “VirtualProtect”, “NtContinue”, and “kernelbase.dll”. According to our research, we found that the exploit used msvcrt.dll to find the DLL load address of kernelbase and ntdll, and then tried to find the function address of NtContinue in ntdll and VirtualProtect in kernelbase from their exported table, at last controlled EIP to execute NtContinue, then execute VirtualProtect to change the memory attribute to Read Write Execute (RWE) and execute the real shellcode in the last stage of exploit. as seen here:

Figure 6. source code

Below are some malicious behaviors we captured from this first version of the exploit. These malicious behaviors show the exploit downloaded a document file to the Windows temp directory, deleted some registry entries to make sure there is no entry to be restored when opening Word next time.

 

WriteFile

\Users\Administrator\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\EZ9ET1Q3\Microsoft-help[1].wll

\Users\Administrator\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\70Z9M5D6\Microsoft-help[1].doc

\Users\Administrator\AppData\Roaming\Microsoft\Word\STARTUP\Microsoft-help.doc

 

Command execution

cmd.exe /c ping 127.0.0.1 -n 1 &

REG DELETE HKCU\Software\Microsoft\Office\12.0\Word\Resiliency\StartupItems /f&

REG DELETE HKCU\Software\Microsoft\Office\11.0\Word\Resiliency\StartupItems /f&

REG DELETE HKCU\Software\Microsoft\Office\14.0\Word\Resiliency\StartupItems /f&

REG DELETE HKCU\Software\Microsoft\Office\15.0\Word\Resiliency\StartupItems /f&

REG DELETE HKCU\Software\Microsoft\Office\16.0\Word\Resiliency\StartupItems /f&

start “” “C:”

 

Double Kill: Version 2

In the second exploit, attackers used several types of obfuscation to hide the exploit. For example, the textarea HTML tag with display attribute “none” was used to hide the real exploit code. The obfuscated string in textarea started with “>tpircs and ended with “>tpircs<” will not be showed in html page, but it can be deobfuscated to a meaningful string as a part of exploit, for example “tpircs” will be decrypted to “script” tag as shown below in Figure 7.

Figure 7. Obfuscated case part 1

The exploit also uses RegExp and very heavy JavaScript obfuscation. The threat actors utilized several functions like Regex and unescap to make variables seem meaningless, as shown here in Figure 8:

Figure 8. Obfuscated case part 2

In the VB part, obfuscation was not as widely used. Keyword separation using string concatenation and substitution was used instead to evade detection. For example, in Figure 9 below we’ve pointed out where “vbscript” and “fromCharCode” were manipulated.

Figure 9. Obfuscated case part 3

Captured with shellcode execution, we can see the exploit downloaded the malicious PE file to the temp directory and executed it directly through createProcess from some malicious behaviors that were logged:


WriteFile

\Users\Administrator\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\EZ9ET1Q3\v3[1].exe

\Users\ADMINI~1\AppData\Local\Temp\z.exe


Command execution

C:\Users\ADMINI~1\AppData\Local\Temp\z.exe


Largest Criminal Attack Campaign in the Second Quarter

This attack exploits the same vulnerability (CVE-2018-8174) as Double Kill but uses a different method to deliver the payload. It uses PowerShell to download and execute files as shown below in Figure 10.

Figure 10. Obfuscated case part 4

This attack campaign was clearly planned in advance. The malicious domain, ‘payert-gov[.]uk’, was registered around 10:30 AM June 26. The attack started around 10:30 AM June 28. After around one hour, the domain became unresponsive. The domain registration shows that the attacker likely used public information details from an employee of a legitimate financial institution (which was not targeted in this attack).

In total, we captured 699 malicious emails within this attack. All the malicious emails with malicious links we captured were sent from the spoofed “no-reply@hmrcmailgov.uk” email with the subject field containing: “Important : Outstanding Amount”. All malicious URLs used the C2 domain ‘payert-gov[.]uk’. You can see an example of the emails at My Online Security.

 

Conclusion

Looking at this quarter’s trends, we see a surprising drop in malicious sites globally, particularly in Russia and China. Meanwhile, the United States remained the top hosting country for malicious sites and exploit kits. Another surprise this quarter is the sudden, unexpected spike in the Netherlands, both in terms of malicious sites and exploit kits.

In the realm of vulnerabilities, we see remarkable consistency, with a nearly identical roster of vulnerabilities under attack in this quarter as last quarter. The only notable addition to this roster is a vulnerability known to be used in zero-day attacks.

We also saw a clear geographic division in the use of exploit kits, with KaiXan favored in East Asia while Grandsoft, Sundown, and Rig were used more in Europe and the United States.

Next quarter, we’ll return to review this quarter’s statics and trends against the latest data from ELINK to help you better understand the threat trends that are out there.

 and 

[Palo Alto Networks Research Center]

Source: https://researchcenter.paloaltonetworks.com/2018/09/unit42-web-based-threats-2018-q2-u-s-remains-1-malicious-web-addresses-china-falls-2-7/

Gartner Top 10 Security Projects for CISO in 2018

CISOs should focus on these ten security projects to reduce risk and make a large impact on the business.

The new chief information security officer (CISO) of a global bank is overwhelmed by his list of to dos. He knows he can’t do everything, but struggles to narrow down the endless list of potential security projects.

“Focus on projects that reduce the most amount of risk and have the largest business impact,” said Gartner vice president and distinguished analyst Neil MacDonald, during the 2018 Gartner Security and Risk Management Summit in National Harbor, MD.

To help CISOs get started, MacDonald shared Gartner’s top 10 list of new projects for security teams to explore in 2018. “These are projects, not programs, with real supporting technologies,” explained MacDonald. He added that they are new to most CISOs, with enterprise adoption at less than 50%.

Neil MacDonald, Gartner vice president and distinguished analyst, explains the Gartner top 10 security projects for CISOs to focus at the Gartner Security and Risk Management Summit 2018.

No. 1: Privileged account management

This project is intended to make it harder for attackers to access privileged accounts and should allow security teams to monitor behaviors for unusual access. At a minimum, CISOs should institute mandatory multifactor authentication (MFA) for all administrators. It is also recommended that CISOs use MFA for third-party access, such as contractors.

Tip: Phase in using a risk-based approach (high value, high risk) systems first. Monitor behaviors.

No. 2: CARTA-inspired vulnerability management

Inspired by the Gartner continuous adaptive risk and trust assessment (CARTA) approach, this project is a great way to tackle vulnerability management and has significant risk reduction potential. Consider exploring when the patching process is broken and IT operations is unable to keep up with the number of vulnerabilities. You can’t patch everything, but you can significantly reduce risk by prioritizing risk management efforts.

Tip: Require your virtual assistant/virtual machine vendor to provide this and consider mitigating controls in your analysis, such as firewalls.

No. 3: Active anti-phishing

Aimed at organizations that continue to experience successful phishing attacks against their employees. This requires a three-pronged strategy: technical controls, end-user controls and process redesign. Use technical controls to block as many phishing attacks as possible. But make users an active part of the defense strategy.

Tips: Don’t single out groups or individuals for doing the wrong thing; spotlight those who exhibit the right behaviors. Ask your email security vendor if they can undertake this project. If not, why?

Gartner Identity & Access Management Summit 2018
Transform operations into opportunity

ATTEND

No. 4: Application control on server workloads

Organizations looking for a “default deny” or zero trust posture for server workloads should consider this option. This project  uses application control to block the majority of malware as most malware is not whitelisted. “This is a very powerful security posture,” said MacDonald. It has proven to be successful against Spectre and Meltdown.

Tip: Combine with comprehensive memory protection. Is an excellent project for the Internet of Things (IoT) and systems that no longer have vendor support.

No. 5: Microsegmentation and flow visibility

This project is well-suited for organizations with flat network topologies — both on-premise and infrastructure as a service (IaaS) — that want visibility and control of traffic flows within data centers. The goal is to thwart the lateral spread of data center attacks. “If and when the bad guys get in, they can’t move unimpeded,” explained MacDonald.

Tip: Make visibility the starting point for segmentation, but don’t over segment. Start with critical applications and require your vendors to support native segmentation.

No. 6: Detection and response

This project is for organizations that know compromise is inevitable and are looking for endpoint, network or user-based approaches for advanced threat detection, investigation and response capabilities. There are three variants from which to choose:

The latter is a small but emerging market ideal for organizations looking for in-depth ways to strengthen their threat detection mechanisms with high-fidelity events.

Tip: Pressure EPP vendors to deliver EDR and security information and event management (SIEM) vendors to provide UEBA capabilities. Require a rich portfolio of deception targets. Consider MDR “lite” services directly from the vendor.

No. 7: Cloud security posture management (CSPM)

This should be considered by organizations in search of a comprehensive, automated assessment of their IaaS/platform as a service (PaaS) cloud security posture to identify areas of excessive risk. Organizations can choose from several vendors including cloud access security brokers (CASBs).

Tip: If you have a single IaaS look to Amazon and Microsoft first. Make this a requirement for your CASB vendor.

No. 8: Automated security scanning

This project is for organizations that want to integrate security controls into DevOps-style workflows. Begin with an open source software composition analysis and integrate testing as a seamless part of DevSecOps workflows, including containers.

Tip: Don’t make developers switch tools. Require full application programming interface (API) enablement for automation.

No. 9: Cloud access security broker (CASB)

This project is for organizations with a mobile workforce looking for a control point for visibility and policy-based management of multiple-enterprise, cloud-based services.

Tip: Start with discovery to justify the project. Weight-sensitive data discovery and monitoring as a critical use case for 2018 and 2019.

No. 10: Software-defined perimeter

This project is aimed at organizations that want to reduce the surface area of attacks by limiting the exposure of digital systems and information to only named sets of external partners, remote workers and contractors.

Tip: Re-evaluate risk of legacy virtual private network (VPN)-based access. Pilot a deployment in 2018 using a digital business service linked to partners as a use case.

Contributor: 

Source: https://www.gartner.com/smarterwithgartner/gartner-top-10-security-projects-for-2018/

Remembering Robert E Stroud

This weekend, all ISACA lost a dedicated leader, an engaged board member, a passionate colleague and, most notably, a dear friend. Robert E Stroud, CGEIT, CRISC, 2014-2015 ISACA Board Chair, and Board Director 2015-2018, will be deeply missed.

Only 55 years old, Rob passed away Monday, 3 September 2018, after being struck by a vehicle while jogging on Long Island, New York, USA. He is survived by his devoted family: his wife of 35 years, Connie, sons Josh and Kyle, daughter-in-law Allie Elizabeth, and grandchildren Ayden, Haylee and Jeremy.


Robert E Stroud

Rob brought boundless energy and enthusiasm into everything he did for ISACA—and those contributions were many.  He was board chair for the 2014-2015 term, and was a driving force in the launch of ISACA’s Cybersecurity Nexus (CSX). Prior to that, he was international vice president of ISACA, member of the Strategic Advisory Council and Governance Committee, and chair of ISACA’s ISO Liaison Subcommittee. He was a COBIT champion and contributed to COBIT 4.0, 4.1 and 5, as well as numerous COBIT mapping documents. Additionally, he was involved in the creation of ISACA’s Basel II, Risk IT and Val IT guidance.

His excitement about emerging technologies and extensive knowledge of assurance, governance, cloud security and DevOps made him a highly sought-after speaker at events around the world—including ISACA’s. Rob’s technical expertise, his excitement to travel and share his knowledge around the world, and his humor and wit in delivering remarks will be greatly missed.

Rob’s dedication to the profession extended beyond ISACA. He previously served on the itSMF International Board, the board of the itSMF USA and multiple itSMF local chapters.

Additionally, he served as a member of the ITIL Update Project Board for ITIL 2011 and in various roles in the development of ITIL v3.

Rob’s high-impact career in assurance, governance and innovation leaves a lasting legacy. Rob was Chief Product Officer at XebiaLabs, where in the last year he primarily focused on DevOps scalability in the enterprise. Prior to that role, he was Principal Analyst for Forrester Research Inc., where he helped large enterprises successfully drive their DevOps transformations and guided them through organizational change.

He spent more than 15 years in multiple roles at CA Technologies, including Vice President of Strategy and Innovation, where he predicted changing trends in the domains of assurance, cybersecurity, governance security and risk. He also advised organizations on strategies to ensure maximum business value from their investments in IT-enabled business governance.

On a personal note, Rob has been my good friend and mentor. It was his inspiration and support that led me to serve on the ISACA board of directors. I have had the privilege of co-presenting with Rob many times, and frequently we have had lively discussions about new technology, cloud, DevOps and how we can help ISACA have even greater impact. The day before his passing, I was working on a DevOps presentation using slides that Rob had put together and just shared with me to use. Having collaborated with him for so many years, enjoying his advice, company, humor and zest for life, I feel like I have lost a part of me. I’m sure many of you feel the same, and we will explore a fitting way to honor his contributions and legacy. I will let you know of those opportunities as they are decided by the board in a timely fashion.

Rob was always looking forward to new trends, new challenges and new opportunities, so he could best serve his clients, his colleagues, and his friends, whether bonds were just formed or existed for decades. His exuberance lit up the room wherever he went, and he was truly a guiding light and progressive proponent for the association and our professional community.

Rob’s enduring spirit of innovation will continue to influence ISACA and our global family for years to come.

Thank you, Rob. You are gone too soon. We miss you.

Rob Clyde, CISM, ISACA Board Chair

[ISACA Now Blog]

Source: https://www.isaca.org/Knowledge-Center/Blog/Lists/Posts/Post.aspx?ID=1064

Define a Protect Surface to Massively Reduce Your Attack Surface

In cybersecurity, one of the things people tend to focus on the least is defining what they’re trying to protect. The general consensus is that they want to protect against attacks, but the attacks are attacking something. What is that thing?

Over the years, we have been working diligently to reduce the attack surface, but unfortunately, it is a bit like the universe in that it is always expanding. With every new technology comes a new set of problems and vulnerabilities. Most notably, the internet of things has led to a massive increase in the attack surface. Newly revealed vulnerabilities such as those underlying the attacks on chip sets – Spectre and Meltdown – have added almost every modern computational system to the overall attack surface as well.

 

In Zero Trust, instead of focusing on the macro level of the attack surface, we determine what we need to protect: the smallest possible reduction of the attack surface, or the protect surface. Typically, a Zero Trust network defines a protect surface based upon at least one of these four things (remembered by the acronym DAAS):

  • Data: What data needs to be protected?
  • Applications: Which applications consume sensitive information?
  • Assets: Which assets are most sensitive?
  • Services: Which services, such as D&S, DHCP, and Active Directory, can be exploited to disrupt normal IT operations?

The awesome thing about the protect surface is that not only is it orders of magnitude smaller than the overall attack surface but it is always knowable. You may not know what it should be today, but you can always find out. Most organizations can’t really define the attack surface, which is why penetration testers always get inside. There are myriad ways to intrude upon an organization’s macro-perimeter. This is why the idea of a large perimeter-based security approach has demonstrated itself to be unsuccessful. In the old model, controls such as firewalls and intrusion prevention technologies were pushed to the edge of the perimeter, which is as far away from the protect surface as you can possibly get.

In Zero Trust, by defining a protect surface, we can move controls as close as possible to that protect surface to define a micro-perimeter. With our next-gen technology functioning as a segmentation gateway, we can segment networks in Layer 7 policy and granularly control what traffic moves in and out of the micro-perimeter. There is a very limited number of users or resources that actually need access to sensitive data or assets in an environment. By creating policy statements that are limited, precise, and understandable, we can limit the ability of our adversary to execute a successful cyberattack.

[Palo Alto Networks Research Center]

Source: https://researchcenter.paloaltonetworks.com/2018/09/define-protect-surface-massively-reduce-attack-surface/

Global Knowledge: ISACA Certifications Command High Salaries

Of all the certifications represented annually in the Global Knowledge IT Skills and Salary Report, ISACA is more prominent in our top-paying certifications list than any others. This year, ISACA occupies five spots in the top 20, including three in the top six worldwide.

ISACA is associated with two important truths for business technology professionals:

  1. Enhancing a wide range of careers
  2. High salaries

ISACA’s certifications in cybersecurity and governance produce the highest salaries. This is in line with our overall salary data, as governance ranks second and security fifth in average global salaries by category.

Here’s a list of the five top-paying ISACA certifications for 2018 (average salaries are for North America):

1. CGEIT: Certified in the Governance of Enterprise IT

Average salary: $117,544
CGEIT is the top-paying certification in the United States and ranks third worldwide ($92,821). Its North American salary is 34% higher than the average for all certified professionals. This certification is designed for individuals who manage, advise or provide assurance services around enterprise IT governance.

Tenure is among the reasons CGEIT-certified professionals typically have higher salaries. To take the exam, an individual needs at least five years of experience in at least three of the five domains the certification covers, including at least one year in the IT governance framework area.

2. CRISC: Certified in Risk and Information Systems Control

Average salary: $107,968
CRISC ranks sixth in North America and second worldwide in average salary. Its average salary is 23% higher than the average for certified professionals. CRISC is a risk management and security credential designed for IT professionals, project managers and others whose job it is to identify and manage IT and business risks through information systems controls.

Globally, six security certifications made our top-20 list, with CRISC trailing only CISSP in average salary. Cybersecurity positions in general pay well, with the average among North American respondents at $101,083, which is more than $13,000 above the average.

Related training: CRISC – Certified in Risk and Information Systems Control Prep Course

3. CISM: Certified Information Security Manager

Average salary: $105,926
CISM ranks seventh in North American salary and sixth globally. It’s aimed at information security management professionals, focusing on security strategy and assessing the systems and policies in place. To take the exam, certification candidates are required to have at least five years of experience in IS, with at least three as a security manager.

It’s now common that many government agencies require their IS and IT professionals to have a CISM certification.

Related training: CISM – Certified Information Security Manager Prep Course

4. COBIT 5 Foundation

Average salary: $102,112
This premier governance credential has a North American salary that tops $100,000 and a worldwide salary that ranks 11th overall ($77,300). COBIT 5 provides a comprehensive framework that assists enterprises in achieving their objectives for the governance and management of enterprise IT.

ISACA’s governance credentials (COBIT 5 Foundation and CGEIT) are two main reasons why governance certifications have the second highest average salary globally ($84,420).

Related training: COBIT 5 Foundation

5. CISA: Certified Information Systems Auditor

Average salary: $97,117
CISA ranks 13th in the US and globally in average salary. It’s also the most popular certification amongst our survey respondents, with 1,923 CISA-certified professionals. The CISA is perfect for individuals whose job responsibilities include auditing, monitoring, controlling and assessing IT and business systems. The exam tests the ability to manage vulnerabilities.

Originating in 1978 and now in its 40th year, CISA is ISACA’s oldest certification. It requires at least five years of experience in information systems auditing, control or security.

Check out these additional Global Knowledge resources to learn more:

Ryan Day, Content Marketing Manager, Global Knowledge

[ISACA Now Blog]

Source: https://www.isaca.org/Knowledge-Center/Blog/Lists/Posts/Post.aspx?ID=1063

English
Exit mobile version